Boiler Installation at Home in 7 Easy Steps for You

DIY gas boiler installation is not an easy task. As per norms, you must possess the necessary license or certificate for the installation. Therefore, a qualified heating and plumbing mechanic in London suggest before starting with the installation, make sure whether you need a permit from the local county. Else, both your effort and time will be simply wasted.

Easy boiler installation tips

Choose the boiler: Professional mechanics, who deal in boiler installation in London, suggest first you should choose your boiler. Usually, 3 factors guide this selection procedure:

  • The type of gas supply you’ve at home
  • Personal preference and
  • Budget

Do some research on the relevant products as well as the regulations imposed by the local authorities regarding the type of boiler you should have and the installation process. Based on the information you get, buy a suitable product from the market. You also need to buy the relevant accessories like vents, valves or pumps separately.

Preparing the installation area: Check the area in your home where you want to install the boiler. No inflammable item should be stored anywhere near that area. You need electrical, gas and water supplies to run a boiler. Space is also needed to install the external vent. Most importantly the area of installation must be easily accessible for boiler maintenance in future, suggest qualified plumbers in London, who deal in gas boiler installation.

Unpack and prepare the boiler: When the boiler is delivered, remove it from all packaging. For this, you need to remove the screw that secures the gadget to the wooden pallet below. Unpack the accessories and valves too. Now try to install the accessories at the right places.

Water piping installation: Any boiler requires both a feed and return for the hot water system. Usually circulators are installed on the return side while flo-checks on the feed side. You may also consider using zone valves. Make sure to use piping of the right width. There must be enough circulators to deal with the size of the gadget you bought.

Installation of vent and Flue: Experienced plumbers in London suggest your gas boiler must have enough venting to ensure safety clause. The type of venting is dependent on the boiler type you have. Consult the manufacturer’s recommendation over the matter and just go by it.

Connecting gas supply: The gas supply connection varies slightly from system to system, depending on whether you use natural gas or propane. Thus, you must consult the installation manual to correctly deal with this aspect. If you lack the necessary license, hire a qualified professional to complete this step of installation safely.

Get, set, go: When you’re sure that all the connections have been correctly made and there is nothing pending, just turn on the water supply to your boiler. Take help of the automatic feed valve to get the recommended pressure for operating the gadget. Ideally, this value should range between 18 and 22 psi. You need a licensed gas engineer to adjust the carbon dioxide output. The professional will also ensure the installation is at par with the needed standard. Once the professional gives you the green signal, you are just free to go ahead using the boiler.

For more information on boiler installation and relevant topics, please feel free to contact us at 4D Heating and Plumbing. We’re a team of award-winning 24/7 emergency plumbers in London located on Barlby Road. Our qualified and experienced team of plumbers and gas engineers is skilled enough to solve any issue related to central heating, plumbing and boiler to your level of satisfaction.

About admin

This profile belongs to the administrator of Ibandhu. is digital platform to read, learn and share on various topics including technology, internet, health, business, lifestyle, entertainment and many more.

View all posts by admin →