How to Turn an Infant Optics Monitor into Wi-Fi Connectivity

There are lots of things that you can do to turn the infant optics monitor into Wi-Fi connectivity. Fortunately, these are easy to implement, and all you need is a PC with an Ethernet port or USB port. This article about Infant Optics DXR-8 explains some of the easiest ways to get your baby’s nursery wired up for a free wireless internet connection.

Consider the wireless option

Before you begin your system installation, you should consider the wireless option before you opt for the wired one. That is because the hardware can be quite costly. Moreover, the installation process may be complicated. If you go for the wired option, you will only have to stick to the electrical system.

Take a look at the audio and video connectors

The first thing you need to do is to take a look at the audio and video connectors that connect the action to the monitor. If you find that one of them broken, you can quickly fix it using some of the solutions that are available in the market. However, if you find that both of them are broken, then you have to change the cords.You can also test if the electronics are harmed.

How much space you need to make available for the optical monitor

About the electrical wiring, you should decide how much space you need to make available for the optical monitor. Also, you need to plan where you will place it so that it will not interfere with any other furniture. If you do not know how to turn the infant optics monitor into Wi-Fi connectivity, A friend or relative will still ask you to help out.

Place the electrical wires inside the walls

It is best to place the electrical cables inside the walls so that they will not be visible. Also, you can use double-sided tape on the area where you want to hide the wires. It is best to enclose the wire’s length with a hole to prevent moisture from getting inside the wires.

Place a small DVD player next to the monitor

If you want to hide the wires completely, you can place a small DVD player next to the monitor. You can put the cables of the PCM next to the place that the camera of the PCV stands. Remember that the equipment should be placed on a level surface so that the cables will not be exposed.

Use double-sided tape to cover the place

While putting the cables of the act in the place where the action of the monitor stands, you can use double-sided tape to cover the site where the wires of the monitor go. You can also include the wires of the PCV that are not visible. After all the wiring is done, you can connect the cables of the PCV to the act.

 

Cut the electrical wiring of the PCV to the act 

In the second step, you have to cut the electrical wiring of the PCV to the action. Concerning the headphones, you can hide them at the back of the pack. In this way, you can easily hide the visible wires of the PCV. With the wire cutting, you can easily hide the visible wires of the PCV.

Use clips to hide the wires

You can also use clips to hide the wires of the pack behind the headphones. Just make sure that the cables of the pics do not come out from the headphones. This will prevent moisture from causing damage to the headphones.

Hide the cables of the monitor behind the headphones

You can hide the wires of the monitor behind the headphones by covering them with shrink film. It is best to get two or three pairs of wires of the PCV so that you can hide the cables properly. You can place them in the spaces between the headphones.

 

In the third step, you have to peel off the adhesive from the electrical wiring of the PCV. With this, you can easily plug the PCV in the pc or on the monitor. Once this is done, you can connect the PCV of the monitor and PCV of the pc.

Conclusion

If you have an income less corner console, you can also place it in the corner to avoid any interference. With the electrical wiring.